 |
|||||
| HYDRA-FOLD |
|
||||
| • 35 Degree Angle | |||||
| • Q-tach or direct fit to accept most makes of loaders | |||||
| • Crossover Relief Valve | |||||
| • 42” High moldboard | |||||
| • Spring-trip Cutting Edge | |||||
| • 30” Deep Spring-Trip Endplates (Optional - Available on Manual or Hydraulic) | |||||
| • Replaceable Cutting Edge, Floating Edge Endplate | |||||
| • Adjustable Skid Shoes, Adjustable Lateral Float | |||||
| • Min. HP Recommended: 125 | |||||
| • Sub-Frame available for most tractors | |||||
|
|
|||||
|
SPECIFICATIONS |
|||||
| PART# | NAME |
RETRACTED WIDTH |
EXPANDED WIDTH |
APPROX. WEIGHT LBS. |
RECOMMENDED MINIMUM HP |
| HFA914 | HYDRA-FOLD ANGLE BLADE 9' - 14' | 9' | 14' | 2400 | 80 |
| HFA1018 | HYDRA-FOLD ANGLE BLADE 10' - 18' | 10' | 18' | 3600 | 125 |
| HFA1220 | HYDRA-FOLD ANGLE BLADE 12' - 20' | 12' | 20' | 3800 | 125 |
| HFP85135 | HYDRA-FOLD PUSHER 8.5' - 13.5' | 8.5' | 13.5' | 2600 | 80 |
| HFP1018 | HYDRA-FOLD PUSHER 10' - 18' | 10' | 18' | 3600 | 125 |
| HFP1220 | HYDRA-FOLD PUSHER 12' - 20' | 12' | 20' | 3800 | 125 |
