COMPACT/UTILITY TRACTOR
POST HOLE DIGGER

Model 300 Post Hole Digger The model 300 post hole digger is designed to fit most 14 - 24 horsepower small tractors equipped with a category 0 three-point hitch and a 540 rpm PTO. (This model will fit the 16 hp Kubota model B7100 tractor). The model 300 post hole digger handles 6", 9", and 12" diameter standard duty 30" length augers. The three position boom allows the unit to fit a variety of tractor models. A lever is provided for the operator to adjust the auger starting angle.
The gearbox has a 3:1 gear ratio and is protected by the shear-pin PTO drive. The gearbox features tapered roller bearings and spring loaded seals. The gearbox has a 5 year limited warranty. The model 300 digger is built for years of trouble-free work with a minimum amount of maintenance.

NOTE: Most tractors of this size have lift arms made of 7/8 inch diameter (Cat. 1) pins, but with the 20 inch Cat. 0 spacing. Tractors with very short lift arms made for 5/8 inch diameter pins may not be suitable for digging post holes. (Special 5/8 inch diameter pins are available for those tractors that can handle the post hole digger.