Finishing Mower
Rear Discharge
Finishing Mower Photo Cut your lawn grooming task down to size with Worksaver high capacity finishing mowers. The models EM/2 60 (5 ft.) and EM/2 72 (6 ft.) allow close mowing to shrubs and buildings for faster yard maintenance. Either side may be used for close trimming, which isn't available on side discharge systems.
Rear discharge is standard, which is a huge advantage for eliminating grass buildup in uncut areas, reduces blade wear and fuel cost. High lift blades lift the grass and cut it cleanly discharging it neatly to the rear of mower path. The wide discharge throat provides an almost unobstructed flow of cut material.
Four caster gauge wheels adjust the cutting height and allow the deck to float with the ground contour. Solid rubber flotation tires are not effected by punctures or tire pressure loss, ensuring level cut every time.
Built rugged for long economical operation, these mowers will leave your lawn areas with that professionally groomed look neighbors will admire.
FEATURES
  • Close mowing
  • High capacity cutting
  • Rear clipping discharge
  • Wide discharge throat
  • 3 Hi-Lift cutting blades
  • Economical to operate
  • Easy maintenance
  • Floating 3-Pt. hitch
  • Solid wheels and tires
  • Easy height adjustment
  • High blade tip speed
  • Greaseable blade spindle
  • Quick coupler PTO
  • Cast iron gearbox
  • Beveled gear
SPECIFICATIONS
Model: EM/2 60 EM/2 72
Max. Horsepower: 35 hp 35 hp
Cutting Width: 60 inches (5 ft.) 72 inches (6 ft.)
Overall Width: 62 inches 75 inches
Cutting Height: 3/4" minimum to 5" maximum
No. of Blades:
Blade Size:		 3
2" x 20-3/8" Hi Lift		 3
2" x 25-1/8" Hi Lift
Blade Tip Speed: 14,420 fpm 15,070 fpm
Blade Spindle: Greaseable - Ball Bearing
Belt Drive: V-belt (B-77) V-belt (B-90)
Deck Thickness: 8 gauge
3 pt. Hitch: Free-Floating Cat. I
Gauge Wheels: 3" wide x 8" diameter - solid rubber - caster
Wheel Spindle: Greaseable Sealed Bearings
Gearbox: 1:2.83 ratio - Cast Iron Housing with Beveled Gears
PTO Driveline: Quick Coupler Series 3 metric (540 rpm)
Grass Discharge: Rear discharge with wide 34" throat Rear discharge with wide 44" throat
Shipping Weight: 448 lbs. 530 lbs.
Computer #: 650950 650960

DO NOT RIDE, STAND, OR SERVICE IF ENGINE RUNNING.
READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE OPERATION.