HYDRAULIC POST HOLE DIGGERS
Worksaver offers seven hydraulic post hole diggers to meet most needs.

There are many benefits that hydraulic operated post hole digger provides over the PTO operated units. Three of the biggest benefits are:

  1. The ability to reverse the auger should it become entangled in roots or rocks,
  2. No longer replace shear-bolts or repair slip clutches.
  3. No PTO lifting restrictions with the tractor, loader, or backhoe boom.

Models ending with "14H" are designed for 5 - 10 gpm @ 1500 - 3000 psi hydraulic systems. The "14H" units will handle 6, 9, 12, and 14 inch augers.

The models ending with "24H" were designed for 10 - 20 gpm @ 1500 - 3000psi hydraulic systems. The "24H" units will handle 6, 9, 12, 14, 18, and 24 inch augers.

All hydraulic units (except 614H & 624H) come less hydraulic hoses.

614 {Photo The models 614H and 624H three-point post hole diggers are designed for the operator without a front loader but likes the benefits that hydraulic operation. Both the 614H and 624H mount to tractors with cat. I/II hitches.
 
The 714H and 724H will attach to backhoe booms or excavators to allow an operator to reach hard to get to places. These units also attach to either side of a loader bucket with 4 - 1/2" bolts for an unobstructed view of the digging operation.
 		 714 Photo
814 Photo The 814H and 824H models clamp on to the bucket for easy on and off. Each unit slips on to the cutting edge of the bucket and has two turnbuckles and chains to secure it to the bucket.

Adjustable for the left or right side of the bucket, allows the operator to have a better view of the digging operation.
 
The 924H model mounts directly to skid steers with a universal quick attach for increased versatility.
 		 924 Photo