SmoothCut PTO Powered Stump Grinders
 
Economical and Efficient PTO powered stump grinder, makes stump removal fast and easy. Operator easily controls the stump grinder from the comfort of the tractor seat.
 
Photo Close-up of Stump Grinder
Photo of Stump Grinder Stabilizer Bar Photo of Stump Grinder

Features
Maneuverable - goes anywhere a tractor can; gets into tight places.

Higher productivity via it's unique cutting wheel design.

Cutting wheel design provides a smoother cutting action.

Easy to operate - hydraulic controls allow easy operation from the tractor seat using existing tractor hydraulic controls.

Durable carbide-tipped cutting teeth are economical and easy to replace.

Harden bushings used in major pivot points for increased reliability.

Grease zerks provided at major pivot points for extended service life.

Standard needle valve for precise control of cutting feed rate for best cutting action.

SureFoot stabilizer bar provides solid footing during operation.

Rubber deflector helps control chips and debris during grinding.

Parking stand for easy storage.

 

SmoothCut Specifications
  Model SG-26 Model SG-36
Hitch Cat. I Cat. I/II
Overall Length (est.) 75-inches 80-inches
PTO driveline type Series 5 Series 6
PTO speed ----------540 rpm----------
Driveline protection ---------Slip Clutch----------
Gearbox rating/ratio 60 hp / 1:1.5 100 hp / 1:1.46
Cutting wheel construction --Welded 2-piece laminated steel--
Cutting wheel thickness ----------¾"----------
Cutting wheel diameter 26-inches 36-inches
Cutting wheel speed (approx.) 801 rpm
5,515 ft./min		 788 rpm
7430 ft./min
Number of teeth 30 39
Cutting teeth construction ------Carbide Steel Bolt In------
Cutting height above ground 18-inches 18-inches
Cutting depth below ground 10-inches 10-inches
Max. cut depth per pass 5-inches 8-inches
Maximum horizontal cut 28-inches 33-inches
Swing arc 45-degrees 45-degrees
Minimum HP requirement 22-PTO hp 45-PTO hp
Maximum HP 50-PTO hp 100-PTO hp
Weight (est.) 660-lbs. 880-lbs.
Computer product number 811500 811550
Computer product number 811500 811550
* Be Sure front of tractor is properly counterbalanced with front-end weights or front-end loader.
 
 
Photo of Caution Sign  Read and understand Operator's Manual before operation.
Photo of Caution Sign  Stump Grinder will put a heavy load on the rear of your tractor. Be sure front of tractor is properly counterbalanced with weights.
Photo of Caution Sign  Never allow children or bystanders around tractor or stump grinder when you are using equipment