XHB Series
REAR TRACTOR BLADES

 

Built for Cat. II tractors, the XHB model rear blades are designed tough from the ground up. Ditching, grading, or other farm use, the XHB models can move large amounts of material.

 

The model XHB rear blades are available in full manual or any combination of manual/hydraulic control for blade angle, tilt, or offset. The model XHB blade mainframe is welded together into a rugged one piece boxed section.
Extra length allows blade to be rotated 360°. A heavy duty hitch frame is designed for easy hook-up for Cat. II 3-pt. and quick coupler hitches. The 19 1/2 inch high moldboard is formed to roll the dirt upward in a unrestricted flow requiring less horsepower. The grader-type steel cutting edge is reversible which doubles the work life. A choice of hydraulic or manual control allows you to equip this blade for your needs.

The optional relief valve kit is recommended to protect the hydraulic cylinders, blade, and tractor from unexpected shock loads. The XHB blades are designed for versatile, dependable job performance.

 FEATURES
  • Manual or hydraulic tilt, offset, and angle feature
  • 30 inches offset left or right
  • Up to 15° tilt either way for ditching
  • Blade can be angled up to 45° either way
  • Fully welded boxed main frame
  • 19 ½" high moldboard rotates 360°
  • 5/16" formed moldboard for proper material flow
  • 3" alloy steel King Pin
  • Reversible ½" x 6" C1080 cutting edge
  • Grease zerk on main pivot spindle
  • Stress points reinforced
  • Cat. II 3-pt. or Cat. II quick hitch
  • RetracTABLE HD parking stand
  • Optional skid shoes

 

MODEL: XHB-1096 - 8 ft. Heavy Duty Rear Blade 60 to 120 hp
MODEL: XHB-1120 - 10 ft. Heavy Duty Rear Blade 70 to 110 hp
XHB REAR BLADE OPTIONS
(Requires selection of manual or hydraulic control options for offset, angle, and/or tilt.)
Angle or Offset Hydraulic Cylinder Kit (2 required if choosing hydraulic controls) (Kit includes one (1) 4" x 16" HD cyl. and hoses)
Angle or Offset Mechanical Link (ea.)(2 required if choosing mechanical controls) (Can be used in place of 4" x 16" hyd. Cyl)
Angle or Offset Cross-over Relief Valve Kit (Requires both hydraulic cylinders be the same size) (Includes 2 valves and hoses) (This option is for hydraulic controlled blades to protect blade and tractor.)
Tilt Hydraulic Cylinder Kit (ea.) (3" x 8" cyl. w/hoses)
Tilt Mechanical HD Ratchet Jack (ea.) (1 required if choosing mechanical controls)
Skid Shoes for XHB Blades (pair) - Very good for snow removal to protect drives, lots, or sidewalks.