|
Hydraulically Driven Front Loader Mounted Broom
|
|
| The Model FLB is designed for use by municipalities, institutions and large contractors just to name a few. |
| Drive | Gerotor type hydraulic motor |
| Hydraulic Requirements | 10 GPM to a maximum of 15 GPM |
| 1800 PSI to a maximum of 2250 PSI | |
| Allowable operating oil temp range -40° to 180° (oil cooler may be required) | |
| Oil reservoir should be twice the output of the system pump | |
| Frame | Mounts in place of bucket on most Front Loader Models. |
| Angles manually left or right to a maximum of 30°. Can be converted to hydraulic operation using a 10" stroke cylinder supplied by the end user. | |
| Floatation | Broom floats on an adjustable spring chain assembly |
| Broom | 6, 7, or 8 foot wide by 32 inches in diameter |
| Minimum working width | 6' - 65", 7' - 75", 8' - 85" |
| Number of brushes | 6' - 36, 7' - 42, 8' - 48 |
| Polypropylene convoluted brush sections are standard. Crimped wire or a 50/50 combination can be supplied at no additional cost | |
| Weight | 6' - 835 lbs, 7' - 886 lbs, 8' - 937 lbs |
