Trac-Vac Model 380, Model 385

The Model 380, 385 Trac-Vacs are two others in Palmor Products' full line of lawn vacuum systems. No special hitching mechanism is needed with the 380, or 385 and it attaches to the tractor with a single hitch pin. With Trac-Vac's quick-connect chute to the mower deck, set-up and storage are accomplished in next to no time at all. The spring-loaded top assembly lifts quickly out of the way allowing you to easily dump the 44 gallon Rubbermaid container anywhere: pick-up truck, composter, or trash pile.

A 3.5HP on the Model 380, or 5.5HP on the Model 385, Briggs and Stratton engines power the air turbine assembly for efficient pickup of grass clippings, leaves and light litter from the mower discharge. The six-bladed, forward curve turbine lends itself to maximum air flow, while enhancing mulching capabilities.

An optional tow kit and remote hose kit with hand wand are available allowing the user to vacuum independent of the mower in difficult-to-reach areas.

The versatile Model 380 or Model 385 Trac-Vacs are quick, quiet and clean to operate.

Note: Right Hand discharge application only.
Pictured above: Model 385 on Cub Cadet Pictured above: Model 385 with tow kit (P/N 38025), and remote hose kit (Model 160)
     
Model 380 Model 385
Engine
3.5 HP Briggs and Stratton
5.5 HP Briggs and Stratton Intek I/C
Starter
Rewind
Rewind
Frame
Welded 11 Ga. Steel
Welded 11 Ga. Steel
Container
Rubbermaid Brute 44 Gal.
Rubbermaid Brute 44 Gal.
Length
54"
54"
Height
48"
48"
Width
35"
35"
Weight
120 lbs.
135 lbs.
Gas Tank
2 Quart
3 Quart
Gasoline
Regular or Unleaded
Regular or Unleaded
Oil
SAE 30 or 10 W-30
SAE 30 or 10 W-30
Crank Case Capacity
1 1/2 Pints
1 1/4 Pints
Air Turbine
6 Bladed Forward Curve
6 Bladed Forward Curve
Operation Speed
3500 rpm
3800 rpm
Intake Hose
6" Rubber (EPDM)
6" Rubber (EPDM)