|
|
|
|
Vicon CM 167-217-247
Fast, clean cut mowing
Vicon CM disc mowers bring together two prime requirements of
farmers and
contractors and supply the solution in one machine: larger
working widths
and low weight. With working widths of 1.65, 2.15 or 2.40 meters
there is a
CM mower to suit any size of farm. They are your guarantee of a
substantial
mowing capacity at a low power requirement. Sturdy, strong and
fully
protected on the underside of the cutter bar the CM disc mowers
are suitable
for the roughest jobs including road side and bank mowing for
instance.
Operating simplicity
Just set the cutting height by adjusting the tractor
top link, and drive
off. There is an hydraulic cylinder to raise the cutter bar into
the upright
position as a standard fitting on the CM 217 and CM 247 - an
option on the
CM 167 - so you need not leave the tractor seat to bring the
mower into
transport position, no wider than the tractor itself.
Swath easy to pick up
As soon as the crop is cut it is conveyed over the full width of
the cutter
bar and deposited in a wide swath; so it dries rapidly exposed
to sun and
air. The drum on the outer disc combined with a swath board
create a wide
separation between adjacent swaths. |
|
|
